How to Restore a Metal Medicine Cabinet – Before and After

It’s Friday! Woot! (Well technically I’m writing this on a Thursday, but still the excitement is there!)

Today, I figured I would share another little piece of the bathroom before it’s huge debut.  One of the the things I loved about the bathroom was that it had an original steel medicine cabinet.  However, like EVERYTHING else at my house it had been severely neglected and thus was in pretty poor/gross looking shape.  It was rusted out and just looked like you would not want to put your toiletries anywhere near this thing.

25241856244_ff8b924f30_o
GROSS

So most things can be saved if they are rusted, unless it’s rusted through – then you’re S.O.L. and have to think about replacing.

Step One – Deciding if your rusted metal can be saved:

One good way to see how extensive your rust damage is, is to get a coarse grit sand paper and gently (at first) start to sand out the rust.  If you see the metal starting to shin through, no clumps of rust deteriorating and no holes, then you should be able to turn a rust situation around.

NOW PUT ON YOUR SAFETY VENTILATION MASK AND GLOVES!

26136012301_1671703525_c1

Step Two – Sanding

Depending on the current finish and extent of the rust damage, you will need to determine how the best way to sand your metal will be. For the cabinet, I hand sanded the entire thing (yes, your arms will be exhausted).  Since the cabinet was pretty delicate I did not want to use power sanders and dremel tools on it. I started with a coarse 60 grit sanding block (easier to grip and get in weird spaces) and sanded the entire cabinet – rusted or not.  I did focus heavily on the rusted areas, buffing out any rust that remained.  Then I used a 100 grit paper to smooth out any transitions from the original paint.

 

25573975010_9decc2b04a_b

Step Three – Prep Cleaning

This is the MOST important step. You will want to ensure the entire surface of your project is 100% clean.  The best way to do this is to use a dry rag or vacuum to get the larger dust/paint particles out. Once you have done that, get a clean rag very very wet with Denatured Alcohol and wipe the cabinet down until it is so clean you could virtually perform some sort of surgery on there – NO PARTICLES, NO DIRT, NO UNEVEN/WEIRD SURFACES.  If you get to this step and find there is a significant uneven lip or not a smooth transition from paint to metal then you need to go back to Step Two.  Believe me, I know you will be tired and I know you will want to just keep moving forward, but if you don’t ensure your base is smooth and clean you will end up with something you HATE and regret not doing it right.

 

91191415-ccaf-4e29-84fa-3e6e4f889745_400
go ahead and buy the gallon you’re gonna love this shit for all your cleaning needs. 

Step Four – Painting

Now the moment of truth!  You’ll want to tape and cover any surface you don’t want paint on.  That takes the most time.  Then you’ll want to make sure you have a spray paint that is meant to protect and will last.  I would HIGHLY recommend Kilz as a primer (if necessary) and then Rust-oleum for the actual color followed by a clear coat. This process will ensure that with proper cleaning and care, your metal will not start rusting again.  Now thankfully the dude has taught me how to spray paint like a professional in the past- this part can be hard.  The only two things to keep in mind are stay at least 12 inches away and keep moving with long smooth sprays.  Also remember, it doesn’t need to be full coverage the first time – in fact the slower you go and more coats you do the better the end result will be. Just remember to let each coat dry fully.

25241859804_b6d84198de_c
first coat – notice it’s not fully covered. 
25779611271_c7c3f8c059_c
getting there! still some uneven color but one/two more coats should do it!

Paint process in general:

  1. apply Kilz or other high quality primer
  2. apply desired Rusto color
  3. apply Rusto clear coat

Are you ready for the official before and after?!

Before!

25241856244_ff8b924f30_o

After!

26293058961_b9039d646c_b

 

Seriously, can you believe that is the same cabinet?! I’m so excited to start using it.  Also keep in mind you NEED to keep your protective mask on the whole time otherwise you will get high on paint fumes – which is not safe or cute. I bought my ventilation mask from Harbor Freight – it cost $17 and I use it for everything paint related at my house since there IS lead paint in my home. Seriously HUGE DISCLAIMER!! If you have a home older that 1980 you should err on the side of caution and assume there will be lead paint in your house.  People saved/loved that nasty scary shit and it WILL HURT YOU. So don’t be dumb – buy some protective gear and wear it. 

Advertisements

Farm House Update: Week 3

Well, we are 3 weeks underway of getting the farmhouse – livable.

Here are the things we have done:

  1. removed all bathrooms that were not supposed to be there
  2. re-did the main bathroom on the first floor
  3. removed all debris from the yard/house
  4. starting painting
  5. hung window treatments
  6. got all new appliances
  7. installed new well system
  8. installed washer & dryer
  9. repaired all rusted windows
  10. removed paint from all window sills
  11. installed new furnace and water heater

It’s been A LOT of work.  Thankfully, Lois has been a huge help with most of these items – the yard looks 1000% better due to her. On the days we were able to tackle things together it felt like we got a lot more done than I would have ever imagined.  My Pops has been a major help in figuring out what we can/can’t do electrical wise and prepping for Connelly Power Co to jump in on some things.  We still can’t live there until we resolve the electrical issue for the water pump/well system. That is the most frustrating part, since we really can’t live there without water, but everything will be easier to work on, continue to deal with once we live there.  Right now, every moment over there has to be utilized 100% so I think I speak for everyone, but I’m tired.  I love working on the house and it is really rewarding and exciting, but it’s just hard to not have a bathroom to use there, or water to use – and it’s hard to drive back and forth to our apartment in Broomfield (30 minutes away). Eh, but why am I bitching? I fought super hard to do all this – just at a different pace I think, but oh well in a months time or less it won’t feel ‘so close, yet so far’.  Plus, a lot of the things I had planned on spacing out over 2 years will now just be done. So when we do move in we can literally just start enjoying it instead of prolonging some of this fun.

Moving forward I’ll being doing more ‘before and after’ shots on our progress – now that there are some really impressive ‘afters’!

Thanks again, Lois, Pops, Uncle Mark (MD Services – my HVAC/plumbing hero), Aunt Lori, and everyone else in their virtual support so far in helping us get this fixer upper livable!

Here are some photos of the recent happenings:

25951383470_2778cec84b_c
Lois cleaned up the front yard and what a difference! So clean and pretty!
25574083020_e5e35b43d9_c
just some of the yard debris we cleaned up – broken glass/car parts?
26034230246_805e2f10ff_c
it’s the simple things although it is still un-used due to no water at the house. 

26136012301_1671703525_c26136011521_13d3cf42ec_c

26176438466_8454730390_c
Leopold was in love with the house – and so cute on his house tour.
25599736173_031a6b4142_c
A sight for sore eyes – new well jet pump and tank (note no longer in the crawl space under the stairs).
25945618002_508297bf89_c
‘oily beau hunk’ installs my cellular ikea blinds also Sixteen Candles joke. 
26034229176_fbc0d6782d_c
new washer and dryer – thanks pops and cym! 
26012789156_5d68275597_c
window sill- i’m blue da bo dee ba de dow….. 
25929529920_bc93c84f3d_c
look at the sexy new copper plumbing for my washroom…. rawwwr!
25764461400_0a8b7c7708_c
before: yard cage for former tenants that didn’t pay rent…..
26202533165_f704ab80b2_c
after: bunny coop/chicken larvae den removed. just a nice space for appropriate plants.